A complete GlideStop fence system is available as an option for all MORSO notching machines.

This upgrade offers the following benefits:

• Fully adjustable index stops can be set at any point along the fence rails for repeated accuracy
• Index Stops can be spaced as close as 9/16” apart
• Twenty index stops are included in the basic package, additional Stops can be added anytime
• Index stops can be by-passed at any time without moving and re-setting
• Self-adhesive tape scales on both fence rails for accurate positioning in 1/32” increments
• Offers the benefits of twenty standard flip-stops at a fraction of the cost

Once set, the GlideStop uses a spring-loaded contact arm to register against the index stops. This “mechanical memory” design has the accuracy needed to make precisely spaced face-frames, again and again. It is especially helpful for repetitive settings like drawer banks, door openings, etc. which do not change from job to job.

In addition, the system allows the user to by-pass pre-set index stops at any time, without having to move and re-adjust the stops!

The contact arm is simply tilted forward, sliding over the stop index. The location of the GlideStop is shown on the tape scale, hairline pointers on each side make set-up fast and reliable.

The patented GlideStop design uses a pressure bar to clamp against the fence rail. This avoids the marring of the rails by the locking lever, and it also assures positive clamping without “creeping”. Simply slide the GlideStop to the desired position and turn the locking lever – done.