| The
Hoffmann MS35SF
Double Miter Saw-Router combination machine |
|
|
MS35SF Double
Miter Saw with infeed and outfeed tables,
support stands and digital length stop. |
Cabinet Door
Compound
Mitered Crown Moulding
Furniture
Components
Lighting Fixtures
Trophy bases
Game Tables
Picture Frames
Curio Cabinets
Architectural Millwork products
Jewelry and novelty boxes
Bulletin boards
Door and window casings
Spa
enclosures
Base
frames
|
The Hoffmann MS35SF Double Miter Saw is equipped
with two sawing and routing stations, mounted at
a fixed 90 degree angle to each other. Each station
consists of a sawblade to cut the material, and
a routing head to rout either one or two dovetail
keyways per miter.
Solid hard and softwood as well as panel products
like MDF, MDO, particleboard or plywood can be cut
to size and
routed for Hoffmann dovetail keys in one cycle.
|
|
The
maximum material width is 3 1/2" = 89mm, the
maximum material thickness is 4" = 100mm.
The routing height for each
keyway position can be
adjusted by the operator from 0 - 3" = 0-76mm.
Different routing heights can
be set for each position to allow the processing of
profiled moulding or material joined with a compound
miter.
The key locations can be adjusted
by the operator from 1/4" - 3 1/8" = 6-80mm,
measured from the tip of the mitered end. These adjustments
are displayed on calibrated "SIKO" counters,
assuring perfect repeatability.
The material is placed onto
the material support on the left side of the machine.
The operator actuates the pneumatic foot switch to
secure the workpiece with eight pneumatic clamps.
These clamps are mounted behind the sawblade guard
for added safety.
Once the material is secured,
the operator must press two buttons at the front of
the machine simultaneously to initiate the cutting
and routing cycle. This two-hand-control design forces
the user to have both hands out of harms way.
|
DETAIL
|
|
 |
Machining Sequence: |
|
-
Sawblades
cut through material and retract up to their home position.
-
Both halves
of the machine table move approx. 18" apart to
create a space for the routing heads.
-
Routing
heads move up to rout the first key location, then down,
over and up again to rout the second location.
-
The tables
move back to the center of the machine and the pneumatic
clamps release the material.
The MS35SF
is equipped with a 7 3/4" wide aluminum fence on the
right side of the machine. This fence is 63" = 160cm
long, longer lengths are available. The width of 7 3/4"
assures sufficient support, even for wider material. Moving
the stop assembly to the desired location and locking it
in place sets the workpiece length. The length measurement
is shown directly on the stop assembly with a digital display,
the accuracy is .001" = .01mm. The operator can change
the display from fractional inches to decimal inches or
decimal millimeters.
An infeed material
support table is supplied for the left side of the machine,
the length is 63" = 160cm.
|
|
|
Technical Specifications
|
| |
|
|
| |
Power: |
220 Volts, 3 Phase, 60 Cycles, 15
Amperes |
| |
Air Supply: |
90 psi |
| |
Router heads: |
two motors @ 450 Watt, 24,000 rpm,
6.00mm collet |
| |
Saw heads: |
two motors @ 2 1/2 HP, 3,470 rpm |
| |
Sawblades: |
350mm diameter, 30mm bore, carbide
tipped |
| |
Router bits: |
Hoffmann solid carbide router bits,
W-1, W-2, W-3 |
| |
Cutting capacity: |
3 1/2" max. width, 4" max.
thickness |
| |
Sawblade cutting angle: |
45 degrees |
| |
Min. material length: |
3" |
| |
Max. material length: |
96", longer lengths possible
with extended fence and table |
| |
Operation: |
two-hand safety controls |
| |
Controls: |
electronic - pneumatic operation with
PLC |
| |
Dust collection: |
two dust collection ports, 4"
diameter, 400cfm each |
| |
Overall dimensions:
|
57" length
66" height
40" depth
220" total length w table extensions
Weight approx. 1665 lb.
|
|
Standard Features:
|
|
The Hoffmann
MS35SF is shipped ready for operation, including infeed support
table, right hand side fence system with digital display,
solid carbide router bits installed, air filter-regulator-lubricator
assembly installed, two-hand safety operation, separate flow
control valves for sawblade and routerhead feed rate, emergency-stop-switch,
manual and toolkit. |
|
|
Machine Price
: $37,265.00 |
| |
|
|
|
|
