The T 53 370 is a production-duty, cast-iron miter saw. It is the only tilting head model from OMGA's line-up of precision miter saws, allowing the processing of material requiring compound miter cuts.

The machine base and table are heavy-duty cast iron, designed for years of trouble free operation.

The rotary table, which rides on long lasting roller bearings, has miter stops at 45°, 30°, 22.5°, 15° and 10° in both directions. The steel plunger on the front of the machine is installed in an adjustable bushing, allowing the operator to finely tune the miter settings. In addition, all angles between 0° - 45° can be manually locked in place.

Two belts connect the powerful 3.0 HP induction motor to the saw blade arbor. By design, belt driven saws offer greater precision than direct drive saws because most of the motor vibrations are kept from the saw blade. In addition, the heavy cast iron base keeps vibrations to a minimum.

The large machine table provides a stable and flat surface for all types of materials, while the front and sides of the base are pre-drilled to allow easy attachment of accessories like fence systems, clamps, fixtures, etc.

With a cross cut capacity of 6 11/16" at 90° cutting angle, and a maximum depth of cut of 4 5/16", this model will tackle almost any moulding found in a professional woodworking shop.